Service hotline400-8300-187中文English

Contact us
Add:Block K,Xinzhuang lndustrial Park,No.84 Tianyuan Road,Yonghe Street,Luogang District,Guangzhou,PRC
Hotline: 4008-300187
T e l: (020) 82441225
F a x: (020) 82441215
Website: www.jfdhf.com
E-mail: ouya82441225@163.com

Are you here:Home --> Product --> Low temperature chiller

Low temperature chiller

Full flooded type water chiller with two circuits

【Description】

Flooded type water-cooled screw chiller is an energy-saving central air conditioning system with high energy efficiency ratio, it’s developed ,designed and manufactured by Eurasian freezing equipment Co., ltd.. The unit’s energy efficiency up to 5.2.The coefficient of performance of frequency flooded type chiller up to 7.0..The unit is equipped with the collision, interception points oil technology efficient oil separator. and the evaporator using ejector return oil technology.Adopter composite oil return device and combined throttling device for the unit ensured the stability of the unit.In addition to the standard specification, various of non-standard units can be customized to meet different requirements. Our company also produce other power supply products.
Product details

快三网上投注 Key features:

1.High Efficient

 Power consumption decreased 15%-25% than normal dry type products. Installed with double screw 

compressors, high efficient heat exchanger, and electronic expansion valve, the above components will work

 together and at high efficient as 3~1 level。

快三网上投注The units can be equipped with heat recovery tubes, in the low temperature mode, the recyclable heat 

account for 30% of total refrigeration capacity。

 The whole unit efficiency can be increased 5% when heat recycling

2.Running stable

The units has 8 kinds of safety protection measures to ensure the normal operation of the units.

Unit is parallel type design, and equipped with combined throttling device 

To ensure the machine performance in line with national standards, all units passed the test of national 

security detection system before delivery the products.

3。Intelligent management

The unit can be controlled by single chip microcomputer or PLC control, to meet the different requirements of

 customers

The unit adopts microcomputer touch control system, can provide the simplest and most considerate 

operation interface, timely feedback for various repair information。

The control system can be connected with the users’ central control system, customers can monitor of the 

快三网上投注 unit operation status at any time。

4. Easy installation and maintenance

The units are filled with refrigerant and lubricant before delivery, customers only need to connect the inlet

 pipe, outlet pipe and power to run.

The control interface directly display the fault contents, it’s much easier for customers to understand and sort

 out faults。

5。 Various of refrigerant to meet customers’ specific requirements。 

According to customersrequests, various of refrigerant, like R22.R407CR134a will be available for

 customer’s option.

云南11选5走势图 足彩单场网上投注 快3在线投注 状元彩票平台 快赢彩票开户 安徽快3走势 快三网上投注 快三在线投注 恒彩彩票投注 冠军彩票投注